BestTrack Champ Timer Operations Instructions download pdf (Page 15)

3.2 Detailed List of commands:

3.2.1 od#<cr>:Set/Read number of decimal places

ComputerFinish Line

Sends

od<cr> Read number of decimals currently set.

Description

od3<cr> Sets the number of decimals;

od4<cr> allowable range is 3 to 5.

od5<cr>

Finish Line  Computer

Returns

4<cr><lf> Value read is the number of decimals set.

Description

<cr><lf> Carriage return sent when setting a new value.

?<cr><lf> Invalid command.

3.2.2 of[#]<cr>:Set/Read photo finish trigger delay

This command sets the duration of the delay from the first car crossing the

line to the start of the photo finish signal. The number in this command is the number

of milliseconds the trigger signal will be delayed. When this delay is set to zero, the

photo finish pictures will be taken before the displays indicate the winning lane. You

may need to “fine tune” the delay time to capture the picture just after the first place

is indicated on the display.

ComputerFinish Line

Sends

of<cr> Reads current photo finish trigger delay from unit.

Description

of24<cr> This value may range from 1 to 255 milliseconds.

Finish Line  Computer

Returns

024<cr><lf> Value set for photo finish trigger delay is returned

Description

when reading current setting only.

<cr><lf> Carriage return sent when setting a new delay

value.

?<cr><lf> Invalid command.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 24 25

No comments

BestTrack Champ Timer Operations Instructions Page 15