BestTrack Champ Timer Operations Instructions download pdf (Page 20)

3.2.7 or[#]<cr>:Set/Read automatic reset delay

This command allows you to disable the automatic reset so that it must be

reset manually or set the reset time to anything from 1 to 255 seconds (which

is a very long time).

ComputerFinish Line

Sends

or<cr> Reads the current setting of the reset delay.

Description

or30<cr> Sets the reset delay to 30 seconds;

Allowable range is 1 to 255.

Finish Line  Computer

Returns

30<cr><lf> Value read is the current delay.

Description

<cr><lf> Carriage return sent when setting a new value.

?<cr><lf> Invalid command.

3.2.8 ov[#]<cr>:Reverse lane numbering

This command allows you to change the direction that the results are

displayed over the track.

ComputerFinish Line

Sends

ov<cr> Reads the current setting for direction.

Description

ov0<cr> Normal numbering, ie Left to Right [1 2 3 4]

Lanes begin at the opposite side from the wires.

ov1<cr> Reverse numbering, ie Right to Left [4 3 2 1]

Finish Line  Computer

Returns

0<cr><lf> Value read is the current direction.

Description

<cr><lf> Carriage return sent when setting a new value.

?<cr><lf> Invalid command.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

No comments

BestTrack Champ Timer Operations Instructions Page 20