BestTrack Champ Timer Operations Instructions download pdf (Page 24)

Appendix A: Race Result String

If the rg command is sent to the Champ Timer Finish Line, a result string will be

returned after the race has been completed. The race is not completed until all cars

have passed through the finish line or the force finish command is used.

There are several different variations to the result string depending on the

values you selected for the lane, placement and number of decimals. Some

examples of these are:

A=0.851c B=0.497b C=0.266a . . . H=0.976h<cr><lf>

A=0.851C B=0.497B C=0.266A . . . H=0.976H<cr><lf>

A=0.8513 B=0.4972 C=0.2661 . . . H=0.9768<cr><lf>

A=0.851# B=0.497“ C=0.266! . . . H=0.976(<cr><lf>

1=0.851c 2=0.497b 3=0.266a . . . 8=0.976h<cr><lf>

1=0.851C 2=0.497B 3=0.266A . . . 8=0.976H<cr><lf>

1=0.8513 2=0.4972 3=0.2661 . . . 8=0.9768<cr><lf>

1=0.851# 2=0.497“ 3=0.266! . . . 8=0.976(<cr><lf>

a=0.851c b=0.497b c=0.266a . . . h=0.976h<cr><lf>

a=0.851C b=0.497B c=0.266A . . . h=0.976H<cr><lf>

a=0.8513 b=0.4972 c=0.2661 . . . h=0.9768<cr><lf>

a=0.851# b=0.497“ c=0.266! . . . h=0.976(<cr><lf>

The letters (A. . .H) indicate the lanes, beginning at the lane opposite the wires if

normal direction is selected. The race times are displayed after the lane designator

using the number of decimals set with the od command. The default value is 3

decimals. The next character indicates the placement of the car.

The placement characters for the hex 21 values are as follows:

First Place: !

Second Place: “

Third Place: #

Fourth Place: $

Fifth Place: %

Sixth Place: &

Seventh Place:’

Eighth Place: (

Immediately after the force end of race (ra) command is sent to the Champ Timer

Finish Line, a result string is returned such as:

A=0.851c B=0.497b C=0.266a D=9.999 <cr><lf>

1 2 ... 19 20 21 22 23 24 25

No comments

BestTrack Champ Timer Operations Instructions Page 24