BestTrack Champ Timer Operations Instructions download pdf (Page 6)

7. Plug the power supply into the mating connector on the Champ Timer unit.

IMPORTANT! Use only the 12V DC power supply supplied with your timer!

Wrong power supply voltage will damage your timer & void the warranty!

8. Plug the 9-pin RS-232 interface cable into the Champ Timer and any COM port on

your PC. You may also use an RS-232(Serial) to USB conversion cable to use a

USB connector on your computer. Use the CD that comes with the USB to Serial

adapter to install the driver.

9. Plug one end of the Reset/Start Switch cable into the vertical post of the timer and

the other end into the jack with the Reset/Start Switch. Make sure that it is fully

inserted. You may mount the Start Switch onto your track or use the timer without it.

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

No comments

BestTrack Champ Timer Operations Instructions Page 6